Accessories

Snow backpack
Shaft solutions
Hydrant handler
Compressor with assembly
TOPSNOW and SNOWSTORM (snow hose)
Fittings
Base Frame Mobile


Snow backpack

Makes checking the snow easy.

The snowmaker backpack is the ideal carry-along to help the snowmaker inspect the quality of the piste, as the pack not only contains all the useful tools but also many common replacement parts – from the nozzle to the rubber seal – along with practical snowmaker aids such as a headlamp, folding shovel or wet-bulb measurement device.

Contents:

Tool case

  • socket-head wrench
  • snap-ring pliers
  • screw wrench
  • nozzle spanner
  • wet-bulb measurement device
  • thread sealant
  • pocket torch
  • Victorinox Swiss multi-function tool

Spare parts case

  • nozzles
  • mixing chambers
  • flow stabiliser
  • nozzle plugs
  • nucleator outlet
  • O-rings
  • cylinder screws
  • KAMLOK rubber gasket
  • tap key
  • rags

Snowmaker accessories

  • snow shovel, foldable
  • gas burner
  • headlamp

Shaft solutions

The right product for every customer.

To be able to respond to the needs of our customers, we offer a variety of shaft components that can be individually assembled and combined. This enables us to offer our customers flexible and cost-effective solutions.

Concrete chamber

  • Exterior dimensions 1.4 x 1.4 x 1.45 m (L x W x H)
  • Entry 65 x 65 cm, galvanised lid, lockable
  • Service hatch incl. lance foundation tube
  • Side walls with light declination (slope) for high stability
  • One-piece design approx. 1,700 kg
  • Two-piece design approx. 2 x 850 kg

Satellite Chamber

  • Square shaft, galvanised steel, 40 x 40 x 75 cm,
    incl. foundation tube
  • Optional in place of concrete chamber (pairwise combined)
  • Connected in parallel (same as lance on concrete chamber)
  • Savings in control system power supply unit, combi-hydrant, concrete chamber

Control incl. power supply unit

Compact controller for connection to the control system, emergency shutdown function for hydrants, power distribution

Combi-hydrant

Combination hydrant for air and water hydrant, one- or three-stage, incl. filtering of the water, draining, electric drive for valves, heated

Foundation tube

  • Foundation tube for lance adaptor, set in concrete on-site
  • Straightforward expansion of the lance sites

Hydrant handler

Flexible and self-sufficient.

Exchanging the shaft adapter allows the handler to be used for many common hydrants. Thanks to batteries that withstand freezing temperatures, it works even without mains supply, while the manual handling option allows the handler to be closed if a control cable proves faulty. Via a DIP switch the torque is separately adjustable from 18 to 100 Nm for both directions, and the control inputs can be operated internally or externally via a 24V DC-power supply. Supply voltage from all major snowmakers is thus possible. The device is connected via a 10-pin connector. A pressure regulator and a hose-monitor can also optionally be supplied. This makes the hydrant handler extremely flexible, as it is also compatible with manual machines.

Technical Data:

  • Supply voltage 24VDC, alternatively 230VAC
  • Signal outputs torque limit CLOSED reached /
    Torque limit reached OPEN reached / drive malfunction
  • Operating temperature –25 °C to +40 °C
  • Storage temperature to –40 °C
  • Dimensions 250 x 160 x 300 mm (W x D x H)
  • Weight 9.1 kg (without 24VDC mains adaptor)

Compressor with assembly

Compressed air supply “light” – compact, quiet, economical.

Matching the energy-efficient products NESSY and SNOTEK, a compressor has been developed that is not only quiet and compact, but also economical at the same time. Mounted in a housing of corrugated aluminium sheeting, it supplies the lances with sufficient air pressure.

Easy hook-up:

Via an electrical box hooked up to the compressor by a cable (4 m/63 amps), the floodlights can be directly connected and controlled by a 3-way switch. The adaptor system allows for straightforward mounting on a pole-raising mechanism.

Plenty of advantages

  • Quiet rotary compressor
  • Compact and manageable design
  • Straightforward mounting on a pole-raising mechanism
  • Automatic emptying valve for condensation

Technical data:

Electrical box assembly

  • Service outlet 230 V
  • Heating tape for connecting block and emptying valve
  • Looped floodlight connection (PG)
  • Three-way rotary switch for shut-off / light / compressor

Compressor for NESSY and SNOTEK

  • Connection 1 1/2” fem. KAMLOK – air outlet
  • Power 1.5 kW
  • Cable 400 V, 63 A plug, 4 m
  • Air pressure and output 150 l/min at 10 bar,120 l/min at 8 bar
  • Noise level 64 dB (A)

TOPSNOW and SNOWSTORM

TOPSNOW snow hose

Our high-quality heavy-duty snow hoses are suitable for low-pressure and high-pressure snow guns and lances and come with a two-year warranty.

Advantages:

  • Permanent connection between extraction point and snow guns
  • SBR / EPDM-quality coating
  • cold-, ozone- and distortion-resistant
  • extremely abrasion-resistant
  • smooth-bore rubber
  • from 2 to 4 high-pressure rayon cord inlays prevent ‘memory effect’ when fabric buckles (as opposed to tubes with steel inserts)

Technical data:

  • Custom lengths from 0.5 to 60 m, ready for use
  • Assembly-free mounting of
    KAMLOK couplings (1.5″, 2″, m/f, m/m, f/f)
  • Colour: blue

 

Transport hose SNOWSTORM

PU-coated transport hose in double fabric construction for snowmaking systems.

Advantages:

  • Hight continous duty pressure, sufficient buffers for pressure peaks
  • Good visibility in the area also in the dawn
  • Very abrasion-resistant, robust and persistent
  • Resistant to age, UV and ozon
  • Very good coldness flexibility

Technical data:

  • Available lengths: 10, 20, 30, 40, 50 and 60 m
  • Assembly: each with 1.5“, 2“ or 2.5“ m/f KAMLOK couplings
  • Colour: orange

Fittings

Products that have proven themselves and where the demand is high – a selection.

Identification Add-On
KAMLOK coupling 1 1/2“ female Type D, internal thread, stainless steel
KAMLOK coupling 1 1/2“ female Type D, internal thread, aluminium
KAMLOK coupling 1 1/2“ female Type B, external thread, stainless steel
KAMLOK coupling 1 1/2“ female Type B, external thread, aluminium
KAMLOK coupling 1 1/2“ male Type A internal thread, stainless steel
KAMLOK coupling 1 1/2“ male Type F external thread, stainless steel
KAMLOK coupling 2“ female Type D, internal thread, stainless steel
KAMLOK coupling 2“ female Type D, internal thread, aluminium
KAMLOK coupling 2“ female Type B, external thread, stainless steel
KAMLOK coupling 2“ male Type A, internal thread, stainless steel
KAMLOK coupling 2“ male Type F, external thread, stainless steel
KAMLOK coupling 3/4“ female Type D, internal thread, stainless steel
KAMLOK coupling 3/4“ female Type D, internal thread, aluminium
KAMLOK coupling 3/4“ male Type A, internal thread, stainless steel
KAMLOK closing cap 1 1/2“ female Type DC, stainless steel
KAMLOK closing cap 1 1/2“ female Type DC, aluminium
KAMLOK sealing stud 1 1/2“ male Type DP, stainless steel
KAMLOK sealing stud 1 1/2“ male Type DP, aluminium
KAMLOK closing cap 2“ female Type DC, stainless steel
KAMLOK sealing stud 2“ male Type DP, stainless steel
KAMLOK closing cap 3/4“ female Type DC, stainless steel
KAMLOK sealing stud 3/4“ male Type DP, stainless steel
KAMLOK sealing stud 3/4“ male Type DP, aluminium
KAMLOK-transition piece 2“ f / 1 1/2“ w stainless steel couplings / nipple
KAMLOK-transition piece 2“ f / 1 1/2“ m stainless steel couplings / nipple
KAMLOK-transition piece 2“ m / 1 1/2“ f stainless steel couplings / nipple
KAMLOK-Y-piece female / female-male
KAMLOK-Y-piece female-male / male
KAMLOK-Y-piece with ball valve male / male-female
Striker with bolts KAMLOK 1 1/2“ female, CNS
Striker with bolts KAMLOK 3/4“ female, CNS
Striker with bolts KAMLOK 2“ female, CNS
Rubber gasket KAMLOK 1 1/2“ female
Rubber gasket KAMLOK 2“ female
Ball-valve 2-way stainless steel 1 1/2“ PN 64 with lockable level
Ball-valve 2-way chromed brass 1/2“ inner-/outer thread
GF short arc fitting 1 1/2“ Galvanised, inner/inner thread (2A)
GF pipe coupling fitting 1 1/2“ Galvanised, inner/inner thread (270)
GF pipe coupling fitting reduced 1 1/2“ – 1“ Galvanised, male and female thread (246)
GF Hollander fitting 1 1/2“ Galvanised, fold sealing IG/IG (330)
Reducing nipple 2“–1 1/2“, stainless steel – ET-ET
Bypass valve 10 bar, KAMLOK 1 1/2 “m/f – GF tee with 1/2″ ball valve

Base Frame Mobile

The lightweight for mobile snowmaking.

The installation of the base frame occurs before winter with a wheeled vehicle on the mounted wheels or with a snow groomer on the snow. The mobile allows a very easy relocation of the complete snowmaking system including compressor and fully automatic system. With the rake blade adapter the snow groomer can relocate the lance to the favoured place. The level control takes place over 4 crank spindles. The low-maintenance lances are arbitrary in lengths between 3 and 10m. The nozzles are out of hard-anodised aluminium. The circa 250 kg weighty base frame (gross weight + 450 kg rear weight) can be assembled with a rotary compressor. Wheter fully automated with weather station and automatic connection by falling temperatures or shiftable by hand, you get a white surprise.

Specifications:

  • Regulation of level with 4 manual screws up to 600 mm
  • Wheelset and towing bar fixable (optional)
  • 1.5 kW compressor (optional)
  • Galvanised steel chassis

Technical Data:

  • Length: 1900 mm
  • Width without wheels: 1550 mm
  • Width with wheels: 1750 mm (easily removable)
  • Height (without lance): 1150 mm
  • Weight: 250 kg + 450 kg rear weight
  • Lance: up to 10 m